Printable View
سلام
در 5300 برای اینکه هر پورت ایوان را یک رنج ای پی بهیم چه کار باید کرد.
خودم چنین کاری کردم نشد
ip local pool dial-E1-1 192.168.200.10 192.168.200.90
ip local pool dial-E1-0 192.168.100.10 192.168.100.90
interface Serial0:15
peer default ip address pool dial-E1-0
interface Serial1:15
peer default ip address pool dial-E1-1
ول در اینتر فیس گروپ اسینک موندم
interface Group-Async1
peer default ip address pool dial-E1-0
group-range 1 120
لطفا راهمنایی کنید.
سلام
امیدوارم که بدردتون بخوره و اگه تونستید به بقیه هم اطلاع بدید
[FONT=Courier][SIZE=1][LEFT]Current configuration:
!
version 12.1
service timestamps debug datetime msec
service timestamps log uptime msec
no service password-encryption
!
hostname lala
!
logging rate-limit console 10 except errors
!
username testuser callback-dialstring 6036 password 0 test[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Access server calls back testuser at phone number 6036
!-- The callback parameters can also be configured on a RADIUS/TACACS+ server.[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]!
spe 1/0 1/9
firmware location system:/ucode/mica_port_firmware
spe 2/0 2/23
firmware location system:/ucode/microcom_firmware
!
resource-pool disable
!
modem-pool ModemPool8210[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Modem pool for calls to a specific phone number[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]pool-range 1-40[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- The range of the modems in the pool
!-- Modems 1 through 40 are included in this pool[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]called-number 8210 max-conn 40[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Specifies the DNIS to be used for this modem pool
!-- Incoming calls for phone number 8210 are assigned to this[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]pool
!
modem-pool ModemPool8211[/LEFT]
[FONT=Courier][SIZE=1][LEFT]pool-range 41-60,61-84[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- The range of the modems in the pool
!-- Modems 41 through 84 are included in this pool[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]called-number 8211 max-conn 44[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Incoming calls for phone number 8211 are assigned to this pool[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]!
ip subnet-zero
no ip finger
!
isdn switch-type primary-net5
chat-script mod ABORT ERROR ABORT BUSY "" "AT" OK "ATDT \T" TIMEOUT 30 CONNECT \c[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Chat script for dialout[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]!
controller E1 0[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- DNIS number for this E1 is 8210[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]clock source line primary
pri-group timeslots 1-31
!
controller E1 1[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- DNIS number for this E1 is 8211[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]clock source line secondary 1
pri-group timeslots 1-31
!
controller E1 2
!
controller E1 3
!
!
interface Ethernet0
ip address 10.200.20.22 255.255.255.0
!
interface Serial0:15[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- D-channel for E1 0
!-- DNIS number for this PRI is 8210[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]description PRI 8210
no ip address
encapsulation ppp
isdn switch-type primary-net5
isdn incoming-voice modem[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- All incoming voice calls on this E1 are sent to the modems[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]!
interface Serial1:15[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- D-channel for E1 1
!-- DNIS number for this PRI is 8211[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]description PRI 8211
no ip address
encapsulation ppp
isdn switch-type primary-net5[/LEFT]
[FONT=Courier][SIZE=1][LEFT]isdn incoming-voice modem[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- All incoming voice calls on this E1 are sent to the modems[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]!
interface Group-Async1
ip unnumbered Ethernet0
encapsulation ppp
async mode interactive
peer default ip address pool dialup[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Assign IP address for incoming calls (with DNIS 8210) from pool dialup[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]ppp callback accept[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Permit PPP Callback[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]ppp authentication chap
group-range 1 40[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Interface includes modems 1 through 40 that are also in ModemPool8210[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]!
interface Group-Async2
ip unnumbered Ethernet0
encapsulation ppp
async mode interactive
peer default ip address pool dialup2[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Assign IP address for incoming calls (with DNIS 8211) from pool dialup2[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]ppp callback accept[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Here we accept the callback[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]ppp authentication chap
group-range 41 84[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Interface includes modems 41 through 84 that are also in ModemPool8211[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]!
ip local pool dialup 192.168.100.1 192.168.100.15
ip local pool dialup2 192.168.200.32 192.168.200.126[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Define the IP address ranges for the 2 pools[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]ip classless
no ip http server
!
line con 0
exec-timeout 0 0
transport input none
line 1 40[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Line configuration for modems 1-40
!-- These modems are in pool ModemPool8210[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]autoselect during-login
autoselect ppp
script callback mod[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Invoke chat script mod for the callback[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]login local[/LEFT]
[FONT=Courier][SIZE=1][LEFT]modem InOut[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Set the modems for dialin and dialout[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]modem dialout controller e1 0[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Outgoing call on these modems use e1 0[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]line 41 84[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Line configuration for modems 41-84
!-- These modems are in pool ModemPool8210[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]autoselect during-login
autoselect ppp
script callback mod[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Invoke chat script mod for the callback[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]login local
modem InOut
modem dialout controller e1 1[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Outgoing call on these modems use e1 1[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]line aux 0
line vty 0 4
![/LEFT]
[/SIZE][/FONT][/SIZE][/FONT][/SIZE][/FONT][/SIZE][/FONT]
سلام
امیدوارم که بدردتون بخوره و اگه تونستید به بقیه هم اطلاع بدید
[FONT=Courier][SIZE=1][LEFT]Current configuration:
!
version 12.1
service timestamps debug datetime msec
service timestamps log uptime msec
no service password-encryption
!
hostname lala
!
logging rate-limit console 10 except errors
!
username testuser callback-dialstring 6036 password 0 test[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Access server calls back testuser at phone number 6036
!-- The callback parameters can also be configured on a RADIUS/TACACS+ server.[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]!
spe 1/0 1/9
firmware location system:/ucode/mica_port_firmware
spe 2/0 2/23
firmware location system:/ucode/microcom_firmware
!
resource-pool disable
!
modem-pool ModemPool8210[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Modem pool for calls to a specific phone number[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]pool-range 1-40[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- The range of the modems in the pool
!-- Modems 1 through 40 are included in this pool[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]called-number 8210 max-conn 40[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Specifies the DNIS to be used for this modem pool
!-- Incoming calls for phone number 8210 are assigned to this[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]pool
!
modem-pool ModemPool8211[/LEFT]
[FONT=Courier][SIZE=1][LEFT]pool-range 41-60,61-84[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- The range of the modems in the pool
!-- Modems 41 through 84 are included in this pool[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]called-number 8211 max-conn 44[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Incoming calls for phone number 8211 are assigned to this pool[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]!
ip subnet-zero
no ip finger
!
isdn switch-type primary-net5
chat-script mod ABORT ERROR ABORT BUSY "" "AT" OK "ATDT \T" TIMEOUT 30 CONNECT \c[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Chat script for dialout[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]!
controller E1 0[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- DNIS number for this E1 is 8210[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]clock source line primary
pri-group timeslots 1-31
!
controller E1 1[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- DNIS number for this E1 is 8211[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]clock source line secondary 1
pri-group timeslots 1-31
!
controller E1 2
!
controller E1 3
!
!
interface Ethernet0
ip address 10.200.20.22 255.255.255.0
!
interface Serial0:15[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- D-channel for E1 0
!-- DNIS number for this PRI is 8210[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]description PRI 8210
no ip address
encapsulation ppp
isdn switch-type primary-net5
isdn incoming-voice modem[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- All incoming voice calls on this E1 are sent to the modems[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]!
interface Serial1:15[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- D-channel for E1 1
!-- DNIS number for this PRI is 8211[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]description PRI 8211
no ip address
encapsulation ppp
isdn switch-type primary-net5[/LEFT]
[FONT=Courier][SIZE=1][LEFT]isdn incoming-voice modem[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- All incoming voice calls on this E1 are sent to the modems[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]!
interface Group-Async1
ip unnumbered Ethernet0
encapsulation ppp
async mode interactive
peer default ip address pool dialup[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Assign IP address for incoming calls (with DNIS 8210) from pool dialup[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]ppp callback accept[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Permit PPP Callback[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]ppp authentication chap
group-range 1 40[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Interface includes modems 1 through 40 that are also in ModemPool8210[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]!
interface Group-Async2
ip unnumbered Ethernet0
encapsulation ppp
async mode interactive
peer default ip address pool dialup2[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Assign IP address for incoming calls (with DNIS 8211) from pool dialup2[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]ppp callback accept[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Here we accept the callback[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]ppp authentication chap
group-range 41 84[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Interface includes modems 41 through 84 that are also in ModemPool8211[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]!
ip local pool dialup 192.168.100.1 192.168.100.15
ip local pool dialup2 192.168.200.32 192.168.200.126[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Define the IP address ranges for the 2 pools[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]ip classless
no ip http server
!
line con 0
exec-timeout 0 0
transport input none
line 1 40[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Line configuration for modems 1-40
!-- These modems are in pool ModemPool8210[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]autoselect during-login
autoselect ppp
script callback mod[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Invoke chat script mod for the callback[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]login local[/LEFT]
[FONT=Courier][SIZE=1][LEFT]modem InOut[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Set the modems for dialin and dialout[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]modem dialout controller e1 0[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Outgoing call on these modems use e1 0[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]line 41 84[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Line configuration for modems 41-84
!-- These modems are in pool ModemPool8210[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]autoselect during-login
autoselect ppp
script callback mod[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Invoke chat script mod for the callback[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]login local
modem InOut
modem dialout controller e1 1[/LEFT]
[/SIZE][/FONT][I][FONT=Courier-Oblique][SIZE=1][COLOR=#0000ff][LEFT]!-- Outgoing call on these modems use e1 1[/LEFT]
[/I][/COLOR][/SIZE][/FONT][FONT=Courier][SIZE=1][LEFT]line aux 0
line vty 0 4
![/LEFT]
[/SIZE][/FONT][/SIZE][/FONT][/SIZE][/FONT][/SIZE][/FONT]
سلام
وقتی interface Group-Async2 را ساختم به همراه آن تا 120 اینترفیس ساخته شد
نزدیک بود از صاحب ای اس پی کتک بخورم
it's not possible to assign defferent ip pool to every async
if your AS has 12.3 and upper IOS you can use AV-Pair command via radius
سلام
میتونین به این آدرس برین شاید به دردتون بخوره
[URL="http://www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a0080093c1b.shtml"]http://www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a0080093c1b.shtml[/URL]
[IMG]http://www.cisco.com/warp/public/471/modemdialoutcontroller.gif[/IMG]
[LEFT]Access Server Configuration
Current configuration:!version 12.1service timestamps debug datetime msecservice timestamps log uptime msecno service password-encryption!hostname lala!logging rate-limit console 10 except errors!username testuser callback-dialstring 6036 password 0 test[I][COLOR=#0000ff]!-- Access server calls back testuser at phone number 6036!-- The callback parameters can also be configured on a RADIUS/TACACS+ server.[/COLOR][/I]!spe 1/0 1/9firmware location system:/ucode/mica_port_firmwarespe 2/0 2/23firmware location system:/ucode/microcom_firmware!resource-pool disable!modem-pool ModemPool8210[I][COLOR=#0000ff]!-- Modem pool for calls to a specific phone number[/COLOR][/I]pool-range 1-40[I][COLOR=#0000ff]!-- The range of the modems in the pool!-- Modems 1 through 40 are included in this pool[/COLOR][/I]called-number 8210 max-conn 40[I][COLOR=#0000ff]!-- Specifies the DNIS to be used for this modem pool!-- Incoming calls for phone number 8210 are assigned to this[/COLOR][/I] pool!modem-pool ModemPool8211pool-range 41-60,61-84[I][COLOR=#0000ff]!-- The range of the modems in the pool!-- Modems 41 through 84 are included in this pool[/COLOR][/I]called-number 8211 max-conn 44[I][COLOR=#0000ff]!-- Incoming calls for phone number 8211 are assigned to this pool[/COLOR][/I]!ip subnet-zerono ip finger!isdn switch-type primary-net5chat-script mod ABORT ERROR ABORT BUSY "" "AT" OK "ATDT \T" TIMEOUT 30 CONNECT \c[I][COLOR=#0000ff]!-- Chat script for dialout[/COLOR][/I]!controller E1 0[I][COLOR=#0000ff]!-- DNIS number for this E1 is 8210[/COLOR][/I]clock source line primarypri-group timeslots 1-31!controller E1 1[I][COLOR=#0000ff]!-- DNIS number for this E1 is 8211[/COLOR][/I]clock source line secondary 1pri-group timeslots 1-31!controller E1 2!controller E1 3!!interface Ethernet0ip address 10.200.20.22 255.255.255.0!interface Serial0:15[I][COLOR=#0000ff]!-- D-channel for E1 0!-- DNIS number for this PRI is 8210[/COLOR][/I]description PRI 8210no ip addressencapsulation pppisdn switch-type primary-net5isdn incoming-voice modem[I][COLOR=#0000ff]!-- All incoming voice calls on this E1 are sent to the modems[/COLOR][/I]!interface Serial1:15[I][COLOR=#0000ff]!-- D-channel for E1 1!-- DNIS number for this PRI is 8211[/COLOR][/I]description PRI 8211no ip addressencapsulation pppisdn switch-type primary-net5isdn incoming-voice modem[I][COLOR=#0000ff]!-- All incoming voice calls on this E1 are sent to the modems[/COLOR][/I]!interface Group-Async1ip unnumbered Ethernet0encapsulation pppasync mode interactivepeer default ip address pool dialup[I][COLOR=#0000ff]!-- Assign IP address for incoming calls (with DNIS 8210) from pool dialup[/COLOR][/I]ppp callback accept[I][COLOR=#0000ff]!-- Permit PPP Callback[/COLOR][/I]ppp authentication chapgroup-range 1 40[I][COLOR=#0000ff]!-- Interface includes modems 1 through 40 that are also in ModemPool8210[/COLOR][/I]!interface Group-Async2ip unnumbered Ethernet0encapsulation pppasync mode interactivepeer default ip address pool dialup2[I][COLOR=#0000ff]!-- Assign IP address for incoming calls (with DNIS 8211) from pool dialup2[/COLOR][/I]ppp callback accept[I][COLOR=#0000ff]!-- Here we accept the callback[/COLOR][/I]ppp authentication chapgroup-range 41 84[I][COLOR=#0000ff]!-- Interface includes modems 41 through 84 that are also in ModemPool8211[/COLOR][/I]!ip local pool dialup 192.168.100.1 192.168.100.15ip local pool dialup2 192.168.200.32 192.168.200.126[I][COLOR=#0000ff]!-- Define the IP address ranges for the 2 pools[/COLOR][/I]ip classlessno ip http server!line con 0exec-timeout 0 0transport input noneline 1 40[I][COLOR=#0000ff]!-- Line configuration for modems 1-40!-- These modems are in pool ModemPool8210[/COLOR][/I]autoselect during-loginautoselect pppscript callback mod[I][COLOR=#0000ff]!-- Invoke chat script mod for the callback[/COLOR][/I]login localmodem InOut[I][COLOR=#0000ff]!-- Set the modems for dialin and dialout[/COLOR][/I]modem dialout controller e1 0[I][COLOR=#0000ff]!-- Outgoing call on these modems use e1 0[/COLOR][/I]line 41 84[I][COLOR=#0000ff]!-- Line configuration for modems 41-84!-- These modems are in pool ModemPool8210[/COLOR][/I]autoselect during-loginautoselect pppscript callback mod[I][COLOR=#0000ff]!-- Invoke chat script mod for the callback[/COLOR][/I]login localmodem InOutmodem dialout controller e1 1[I][COLOR=#0000ff]!-- Outgoing call on these modems use e1 1[/COLOR][/I]line aux 0line vty 0 4!end[/LEFT]
