سلام
شما مراحل نصب رو از روي خود راهنمايي موجود در اي بي اس ان جي نصب كنيد حتما كار مي كنه در ضمن سرويس هم مي خواد حتما بياد نصب باشه
سلام
شما مراحل نصب رو از روي خود راهنمايي موجود در اي بي اس ان جي نصب كنيد حتما كار مي كنه در ضمن سرويس هم مي خواد حتما بياد نصب باشه
دوستان براي نصب ibsng بهترين سيستم عامل چي هست؟منظورم راحت ترين براي نصب و بهترين براي كار كردن با ibs .
fedora يا debian يا centos؟
يا اصلا فرقي نميكنه؟
بنده فدورا و centos رو ترجیح میدم.
البته centos در اولویت قرار داره.
هیچ فرقی نداره.
سلام
خیلی خیلی ممنون از جناب gitex عزیز بابت راهنمایی های مفیدشون که زحمت کشیدند
بلاخره برنامه IBSng رو نصب کردم و اجرا شد
یوزر هم ساختم و کانکت شد
منتهی وقتی میخوام صفحه ای رو باز کنم هیچی باز نمیشه انگار کیلوبایتی ردو بدل نمیشه
مشکل از چی میتونه باشه؟
باز هم ممنون
IP Forward
سلام.
ip forward رو بررسی کنید. dns رو هم بررسی کنید. میتونه از عوامل مختلفی باشه که باید بررسی بشه.
اینجا رو ببینید:
Pppd Ras (poptop) - Parspooyesh
ویرایش توسط Gitex : 2010-08-23 در ساعت 07:56 PM
سلام
تقریبا تمام تنظیمات مربوطه رو انجام دادم
وقتی میخواد کانکت بشه ارور 619 میده
و یک سوال داخل فایل /etc/radiusclient/servers
که قرار هست یک ایپی و یک رمز بدیم که با برنامه IBSng ست کنیم گفته شده ای پی رو بزنید 127.0.0.1 ایا همین رو من باید وارد کنم یا ای پی VPS?
یک اموزش کامل پیدا کردم که قسمت هایی از نصب رو از روی اون پیش رفتم که براتون قرار میدم
تمام مراحل کار از ابتدا تا انتها مشخص شده است
این هم اموزشی که قول داده بودم خدمتون
RapidShare: 1-CLICK Web hosting - Easy Filehosting
تمام توضیحات کامل داخلش هست
منتهی بعضی از ادرس هایی که برای نصب پکیج ها داده شده موجود نیست که باید خودتون پیدا کنید فقط مسیرش یک مقداری عوض شده
تمام تنظیمات ip forward و غیره همه داخلش توضیح داده شده قدم به قدم
ولی در انتها بنده خطای 619 میگیرم
تنظیمات فایل options.pptpd
کد:lock debug name pptpd proxyarp nobsdcomp nodeflate #+mschap #-chap #-pap +mschap-v2 require-mppe-128 ms-dns 4.2.2.4 plugin radius.so lcp-echo-interval 20 lcp-echo-failure 6 nologfd #mtu 1496 #nomppe-lower-mtu #connect-delay 5000تنظیمات فایل pptpd.conf
کد:############################################################################### # $Id: pptpd.conf,v 1.10 2006/09/04 23:30:57 quozl Exp $ # # Sample Poptop configuration file /etc/pptpd.conf # # Changes are effective when pptpd is restarted. ############################################################################### # TAG: ppp # Path to the pppd program, default '/usr/sbin/pppd' on Linux # #ppp /usr/sbin/pppd # TAG: option # Specifies the location of the PPP options file. # By default PPP looks in '/etc/ppp/options' # option /etc/ppp/options.pptpd logwtmp localip 192.168.0.1 remoteip 192.168.10.100-200 # TAG: debug # Turns on (more) debugging to syslog # #debug # TAG: stimeout # Specifies timeout (in seconds) on starting ctrl connection # # stimeout 10 # TAG: noipparam # Suppress the passing of the client's IP address to PPP, which is # done by default otherwise. # #noipparam # TAG: logwtmp # Use wtmp(5) to record client connections and disconnections. # # TAG: bcrelay <if> # Turns on broadcast relay to clients from interface <if> # #bcrelay eth1 # TAG: delegate # Delegates the allocation of client IP addresses to pppd. # # Without this option, which is the default, pptpd manages the list of # IP addresses for clients and passes the next free address to pppd. # With this option, pptpd does not pass an address, and so pppd may use # radius or chap-secrets to allocate an address. # #delegate # TAG: connections # Limits the number of client connections that may be accepted. # # If pptpd is allocating IP addresses (e.g. delegate is not # used) then the number of connections is also limited by the # remoteip option. The default is 100. #connections 100 # TAG: localip # TAG: remoteip # Specifies the local and remote IP address ranges. # # These options are ignored if delegate option is set. # # Any addresses work as long as the local machine takes care of the # routing. But if you want to use MS-Windows networking, you should # use IP addresses out of the LAN address space and use the proxyarp # option in the pppd options file, or run bcrelay. # # You can specify single IP addresses seperated by commas or you can # specify ranges, or both. For example: # # 192.168.0.234,192.168.0.245-249,192.168.0.254 # # IMPORTANT RESTRICTIONS: # # 1. No spaces are permitted between commas or within addresses. # # 2. If you give more IP addresses than the value of connections, # it will start at the beginning of the list and go until it # gets connections IPs. Others will be ignored. # # 3. No shortcuts in ranges! ie. 234-8 does not mean 234 to 238, # you must type 234-238 if you mean this. # # 4. If you give a single localIP, that's ok - all local IPs will # be set to the given one. You MUST still give at least one remote # IP for each simultaneous client. # # (Recommended)تنظیمات فایل radiusclient.conf
کد:auth_order radius,local login_tries 4 login_timeout 60 nologin /etc/nologin issue /etc/radiusclient/issue authserver localhost:1812 acctserver localhost:1813 servers /etc/radiusclient/servers dictionary /etc/radiusclient/dictionary login_radius /usr/sbin/login.radius seqfile /var/run/radius.seq mapfile /etc/radiusclient/port-id-map default_realm radius_timeout 10 radius_retries 3 login_local /bin/loginبقیه تنظیمات فایل ها داخل اون آموزش پست بالا که گزاشتم کامل هست
سلام
مشکل خطای 619 رو هم حل کردم داخل لوگ در این مسیر var/log/messages
نوشته بود که
Plugin /usr/lib/pptpd/pptpd-logwtmp.so is for pppd version 2.4.3, this is 2.4.4
باید دستور logwtmp رو در فایل /etc/pptpd.conf دیسبل میکردم که درست شد
منتهی الان خطای 691 میده و داخل IBSng هم لوگ ذخیره میشه و مینویسه کانکت هست
حالا باز با این ارور 691 چه کنیم؟
فایل option خالی کنید و فقط دستور lock وارد کنید.
دوستان، من طبق آموزش PDF سرور لینوکس و IBSng رو نصب و کانفیگ کردم. این کار رو هم زمان و عینا در 4 تا سرور انجام دادم. پس از تنظیمات، یک Group و یک User برای تست ساختم. 2 تا از این سرور ها متصل می شدند و به خوبی هم کار می کردند (حداقل در تست اول). یکی دیگر کلا وصل نمی شد، آخری هم وصل میشد ولی Data Transfer اش به قدری کم بود که عملا هیچ صفحه ای را load نمی کرد (از پنل IBSng دیدم که Transfer کمی دارد در حد 150Byte).
دوستم گفت که توی تنظیمات فایل های مربوطه لینوکس می بایست چند جا بجای localhost و یا 127.0.0.1 این آموزش، IP واقعی سرور رو بزنم... من هم این کار رو کردم ولی این بار کلا وصل نشد، نه به پنل وب و نه از طریق VPN البته مطمئن باشید همه جا رو عوض کردم، هم فایل ها و هم توی وب پنل و قسمت RAS ... در نتیجه دوباره برگردوندم به حالت اول، این همون سروری بود که درست کار می کرد، ولی الآن شده مثل اون یکی و وصل میشه ولی load نمی کنه....
این تمام command ها و کارهایی است که من از اول تا آخر انجام دادم:
ضمنا، برای اتصال L2TP/IPSec و نه xl2tpd چه کاری باید انجام داد؟ برای همین سرور لینوکس به همراه اکانتینگ IBSng... ؟ یک فیلمی از آقای Farshid دیده ام ولی xl2tpd بود و نه L2TP/IPSec واقعی و ایمن، ضمنا ربطی به IBSng نداشت... ممنون میشم اگر راهنمایی بفرمایید...کد:yum install httpd yum install postgresql-server yum install postgresql-python yum install php-gd yum install php-mbstring yum install php-pdo yum install ppp yum install kernel yum install mod_python php httpd-manual system-config-httpd httpd webalizer mod_perl perl-DB-Pg mod_ssl postgresql-libs apr-util dovecot wget http://garr.dl.sourceforge.net/sourceforge/ibs/IBSng-A1.24.tar.bz2 tar xjf IBSng-A1.24.tar.bz2 -C /usr/local service postgresql restart su postgres createuser ibs (?? createuser ibs -s ?? => NO!) createdb IBSng createlang plpgsql IBSng exit vim /var/lib/pgsql/data/pg_hba.conf ### Push INSERT ### Add First => local IBSng ibs trust ### Push Esc => Push : + X => Push Enter service postgresql restart /usr/local/IBSng/scripts/setup.py ### Push these keys in order => 1 2 2 1 ### Enter IBSng Administrator Password ### Push these keys in order => 1 2 5 1 3 1 2 b x rpm -ivh http://acelnmp.googlecode.com/files/pptpd-1.3.4-1.rhel5.1.i386.rpm rpm -ivh http://ftp.belnet.be/packages/dries.ulyssis.org/redhat/el5/en/i386/RPMS.dries/radiusclient-0.3.2-0.2.el5.rf.i386.rpm cd /etc/radiusclient wget http://www.webhostingtalk.ir/dl/Video/IBSng/dictionary.microsoft rm -f /etc/pptpd.conf cd /etc wget http://www.webhostingtalk.ir/dl/Video/IBSng/pptpd.conf rm -f /etc/ppp/options.pptpd cd /etc/ppp wget http://www.webhostingtalk.ir/dl/Video/IBSng/options.pptpd rm -f /etc/sysctl.conf cd /etc wget http://www.webhostingtalk.ir/dl/Video/IBSng/sysctl.conf rm -f /etc/radiusclient/radiusclient.conf cd /etc/radiusclient wget http://www.webhostingtalk.ir/dl/Video/IBSng/radiusclient.conf rm -f /etc/radiusclient/dictionary cd /etc/radiusclient wget http://www.webhostingtalk.ir/dl/Video/IBSng/dictionary rm -f /etc/ppp/ip-up cd /etc/ppp wget http://www.webhostingtalk.ir/dl/Video/IBSng/ip-up vim /etc/radiusclient/servers ### Add End => 127.0.0.1 secretKey ==For Me==> 127.0.0.1 secure-cyber sysctl -p echo 1 > /proc/sys/net/ipv4/ip_forward iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE iptables -A INPUT -i eth0 -p tcp --dport 1723 -j ACCEPT iptables -A INPUT -i eth0 -p gre -j ACCEPT iptables -A FORWARD -i ppp+ -o eth0 -j ACCEPT iptables -A FORWARD -i eth0 -o ppp+ -j ACCEPT chkconfig pptpd on service pptpd restart service postgresql restart service IBSng restart service httpd start service httpd reload -------------------------------------------- ### Enter IBSng Admin Panel => http://xxx.xxx.xxx.xxx/IBSng/admin (default username: system) ### Go to RAS & Click on Add New RAS ### Enter Data => RAS IP: 127.0.0.1 , RAS Description: Desc. , Type: ppdp , Radius Secret: secretKey ### Go to Charge & Click on Add New Charge & Enter it's name, also choose internet as Charge Type ### Click on Add Internet Charge Rule ### Enter Data => Rule Start Time: 00:00:00 , Rule End Time: 23:59:59 , Charge Per Minute: 0 , Charge Per KiloByte: 0 , Bandwidth Limit: 0 , Max BW KBytes/Sec: 512 ### Go to Group & Click on Add New Group ...
متشکرم