Errors and solutions.
When setting up a bot there are not data, the problem is not difficult to find.
1) First you need to check whether Pro.xyCap intercepts packets coming from the program. This is easily done by looking at the Connections tab in the main window Pr.oxyCap. There must be lighted game. Also useful for the diagnosis of the last tab, Error Log. In case of problems - they will be there described.
2) Further check whether in proksikape specified address and port to forward packets. The destination address is the address of your machine, it starts with one of the three combinations of numbers - "192.168.", "10", "172.16." Port 1080.
3) Next we have comes in Charles. It is necessary to check whether the receipt of data from our network. Allow the preparation can be in the first turn, if everything is configured correctly, then Charlie will see the flow of data and asks whether to allow it. Answering "yes". Also in the settings you can adjust it manually to solve everything at once, which would then be sure to skip this item and in case of problems. It is necessary to check the tick Windows Proxy, sometimes it somehow slips. Without it can not function.
4) Turning off the firewall in windows. This is best done through a "Control Panel", "Administrative Tools", "Services", "firewall .." -> Stop. In the case of KIS or ESS - make sure that really stopped network services. In the case of Avasta, Avira, AVG and the like - I recommend to remove them and forget as a bad dream. But first, they must be completely stopped. Many times seek help people faced with problems because of these wonderful products. I usually recommend them to those who wish to harm. Anyway.
5) checks whether Proxy mode in bot, whether there is a designated location.
All the instructions are there, I have everything tuned the first time. In case of any problems - I try to read everything slowly, thoughtfully, without skipping any steps and check that the previous steps have been performed correctly.