سلام به همگی
یک کامپیور توی شبکه ورک گروپ من خطای پرمیژن میده و کسی نمیتونه واردش بشه
مشخصات این کامپیوتر:
ویندوز xp
فایروال خاموش
بدون انتی میروس
پینگ همه شبکه رو داره
همه شبکه پینگ اونو دارن اما تایم delay اون خیلی زیاده (170و 60 و 210 و ...)
Printable View
سلام به همگی
یک کامپیور توی شبکه ورک گروپ من خطای پرمیژن میده و کسی نمیتونه واردش بشه
مشخصات این کامپیوتر:
ویندوز xp
فایروال خاموش
بدون انتی میروس
پینگ همه شبکه رو داره
همه شبکه پینگ اونو دارن اما تایم delay اون خیلی زیاده (170و 60 و 210 و ...)
در این سیستم درایوی شیر کردید ؟!؟
درایو شما NTFS هست یا FAT32 ؟
درایو نه ولی یه پوشه رو شیر کردم و یوزر اون رو توی گروه ادمین گذاشتم که توی همه کامپیوتر ها یوزر ادمین میتونه واردبشه
فرمت درایوی که پوشه شیر شده درش قرار داره ntfs هست
دوست عزیز یک درایو شیر کنید ببینید اون هم همین مشکل رو داره ؟
ببینید من توی my network place گزینه view network computer رو میزنم تا گزینه همه کامیوتر ها باید
این کامیوتره رو اصلا نمیزاره داخلش برم تا بتونم منابعش رو ببینم
با این حال درایو رو هم شیر کردم اما اتفاقی نیوفتاد
درایو همون پوشه شیر شده رو شیر کردم
سلام،
یه سیستم دیگرو به صورت تکی با این سیستم بدون روتر یا سوییچ شبکه کنید، ببینید باز هم مشکلی هست؟
برای اکانتش پسورد بزار
دوست عزی شما در تنظیمات پرمیشنی که به یوزر مربوط به اون پوشه دادی اشتباهاتی داشتی . لطف کن یه یوزر تعریف کن به اسم مثلا علی روی سیستمی که بقیه قراره بهش وصل بشن پسوردشم یگذار 123 مثلا .
روی اون پوشه شیر شده این یوزر رو ادد کن و پرمیشن فول بهش بده توی تب سکیوریتی هم ( که فکر نکنم تو ورک گروپ داشته باشی . اگه بود ) به همین یوزر دسترسی فول بده بعد مجدد تست کن
اگر باز هم نشد امکان ویروسی بودن سستم رو بررسی کن
اینی که میگم رو انجام دادم ولی بازم همین جوریه به شکل زیر
[IMG]http://upload7.ir/images/08760427076072920480.jpg[/IMG]
وقتی من view nework computer رو میزنم و نام اون کامپیوتر رو انتخاب می کنم که واردش بشم توی این محیط اصلا نمیزاره من وارد بشم
جدای مساله بالا یه آنتی ویروس پیشنهاد بدید که من دارم دیوانه میشم
توی یک هفته چند مدل آنتی ویروس نصب کردم ولی تاثیری نداشت (بعضی که ویروس کشی نمیکردند بعضی اگه می کردند هم شبکه منو بلاک می کردند)
[LEFT]
[QUOTE]
had the same problem, and fixed it by going to 'my computer' on the windows 7 machine, right clicking on the drive/folder i wanted to share and clicking on 'properties'...then to the security tab, click 'edit', then 'add', then click the 'find now' button to list everything, add 'everyone' and set permissions to full control.
[/QUOTE]
[/LEFT]
منیع : [URL="http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/you-might-not-have-permission-to-use-this-network/7cf093b4-d871-48d1-b5b7-e0343c432c4c"]You might not have permission to use this network resource. Contact - Microsoft Community[/URL]
[COLOR=silver][SIZE=1]- - - ادامه - - -[/SIZE][/COLOR]
[LEFT]
[QUOTE]
[B]Important[/B] This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base: [URL="http://support.microsoft.com/kb/322756"]322756[/URL] How to back up and restore the registry in Windows
To resolve this issue, set the value of the restrictanonymous registry entry to 0. To do this, follow these steps:
[LIST=1][*] Click [B]Start[/B], click [B]Run[/B], type regedit, and then click [B]OK[/B]. [*]Locate and then double-click the following registry subkey:[B]HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa [/B] [*]On the right side, double-click [B]restrictanonymous[/B]. [*] Make sure that the value in the [B]Value data [/B] box is set to 0, and then click [B]OK[/B]. [*] Close Registry Editor. [*]Restart the computer. [/LIST]
[B]Note[/B] There may be other reasons that you receive this error. For more information, please see the "Similar problems and solutions" section.
If you still have problems with this error message, you might want to ask someone for help or contact support. For information about how to contact support, visit the following Microsoft Web site: [URL]http://support.microsoft.com/contactus/[/URL]
[/QUOTE]
[/LEFT]
منبع : [url]http://support.microsoft.com/kb/913628[/url]
[COLOR=silver][SIZE=1]- - - ادامه - - -[/SIZE][/COLOR]
کلا دلایل این ارور :
[LEFT]
[QUOTE]
[B]Fix “\\computer is not accessible. You might not have permission to use this network resource”[/B]
I’ve previously written an article on [URL="http://helpdeskgeek.com/networking/connect-two-computers/"]how to network two computers together[/URL] that are running Windows XP. I’ve also written about a cool program called WiPeer that lets you [URL="http://www.online-tech-tips.com/free-software-downloads/how-to-connect-two-computers-or-laptops-wirelessly/"]connect two computers wirelessly[/URL] and share data!
However, I’ve never really written a[B] troubleshooting guide for file sharing or networking two computers[/B]. Unfortunately, Windows can be finicky and even though you may think everything should work, accessing a share on another computer may not work.
So if you’ve read my post on creating a peer to peer network at home, but still cannot access a share on another computer on the same network, try out the following troubleshooting tips!
1. [B]Workgroup[/B] – Make sure that each computer that you want to access is in the same workgroup. The name of the workgroup should be exactly the same on every computer. Also, be sure to use the same case for the names (all upper or all lower).
[IMG]http://www.online-tech-tips.com/wp-content/uploads/2009/10/windowsworkgroupname_thumb.png[/IMG]
2. [B]File and Printer Sharing[/B] – Make sure that file and printer sharing is turned on for the network adapter. You can enable this by going to Control Panel, Network Connections, right-clicking on the network connection, choosing [B]Properties[/B] and making sure [B]File and Printer Sharing for Microsoft Networks[/B] is checked.
[IMG]http://www.online-tech-tips.com/wp-content/uploads/2009/10/troubleshootfilesharing_thumb.png[/IMG]
3. [B]Correct Subnet and IP addresses[/B] – You really shouldn’t have this problem if all your computers are connected to the same router, but it’s still worth mentioning.
Make sure that the Subnet Mask and Default Gateway are the same for all computers. If these are not the same, then you will have issues connecting the computers over the network.
You can view these details by going to Start, Run, typing [B]CMD[/B] and then typing [B]IPCONFIG /ALL[/B] at the command prompt on each computer.
[IMG]http://www.online-tech-tips.com/wp-content/uploads/2009/10/troubleshootpeertopeernetwork_thumb.png[/IMG]
4. [B]Check Firewalls – [/B]My suggestion here would be to first disable the Windows Firewall on all computers and then try to access the shared folders. Also, be sure to disable any third-party firewall programs like Norton or Comodo.
If you find that the sharing works with the firewall off, make sure to add File and Printer Sharing to the exceptions list in your Windows Firewall and third-party firewall programs.
[IMG]http://www.online-tech-tips.com/wp-content/uploads/2009/10/troubleshootp2pnetworks_thumb.png[/IMG] 5. [B]Shared Permissions[/B] – If you are getting the “You might not have permission to use this network resource…Access is Denied.”, your problem could also be that the permissions for the shared directory are not properly set.
Depending on whether you are running XP Home or XP Pro, you will have to configure the sharing properly. For XP Home, you can only share files using Simple File Sharing. It’s pretty easy because they have a wizard to walk you through the sharing process.
For XP Pro, you need to [URL="http://helpdeskgeek.com/how-to/what-is-simple-file-sharing-and-how-to-turn-it-off/"]disable Simple File Sharing[/URL] and set the NTFS permissions and share permissions to allow everyone access. You can read my post here on how to [URL="http://helpdeskgeek.com/networking/configuring-ntfs-shared-permissions-on-windows-2003/"]configure share and NTFS permissions in Windows[/URL].
6. [B]Use TCP/IP Protocol[/B] – You probably don’t have to worry about this either, but just to cover all bases, you need to make sure that the computers on the network are all using the Internet TCP/IP protocol to communicate and not IPX/SPX or NetBEUI.
You can go to Start, Control Panel, Network Connections, right-click on the network connection, choose Properties and see which protocol is listed in the list box.
[IMG]http://www.online-tech-tips.com/wp-content/uploads/2009/10/troubleshootnetworksharing_thumb.png[/IMG]
7. [B]Username and Passwords[/B] – If you’ve done everything above correctly and still can’t connect, then you can also try making sure that the usernames and passwords on all computers are exactly the same.
It’s best to have passwords on all accounts and to create a new account on each computer with the same username and password. Sometimes it’s important to create a new account instead of just changing the name or password on an existing account. Make sure the accounts are Administrators.
8. [B]Computer Names[/B] – Make sure that the NetBIOS names for all computers are unique. NetBIOS names are only 8 characters, so if you named one computer JohnnyBoy1 and JohnnyBoy2, they will have the same NetBIOS name.
Make sure that the first eight characters of a computer name are unique, otherwise you will have problems.
9. [B]Local Security Policy – [/B]Another reason you may not be able to access another computer across the network is because of a local security policy.
You can go to Control Panel, Administrative Tools, Local Security Policy, Local Policies, Security Options. Now find the following policy:[INDENT][B]Network access: Do not allow anonymous enumeration of SAM accounts and shares[/B][/INDENT]
Make sure that the value is set to [B]Disabled[/B]. Also, make sure to disable only the setting that says “SAM accounts and shares” not the one that says “SAM accounts” only.
[IMG]http://www.online-tech-tips.com/wp-content/uploads/2009/10/accessisdeniednetworkresource_thumb.png[/IMG]
10. [B]Uninstall anti-virus and Internet Security[/B] – Finally, make sure that all your anti-virus programs are either turned off or uninstalled to test out the connection. If you have any Internet Security program such as Norton Internet Security or Kaspersky Internet Security, disable them!
That’s about it! Those are all the tips I can think of for troubleshooting file sharing issues in Windows! If you still can’t access a network share, post what you’ve tried up till now and I’ll try to help!
[/QUOTE]
[/LEFT]
منبع : [url]http://www.online-tech-tips.com/computer-tips/troubleshoot-file-sharing-peer-to-peer-network/[/url]
[COLOR=silver][SIZE=1]- - - ادامه - - -[/SIZE][/COLOR]
راستی این رو هم چک کنید ضرر ندار :
[LEFT]
[QUOTE]
[B]How to turn off Simple File Sharing[/B]
If you have a Windows XP Professional computer that is not joined to a domain, then Simple File Sharing will be turned on. You can turn it off and use the advanced file sharing features, such as NTFS file permissions.
Go to[B] My Computer[/B] and click on [B]Tools[/B] and then[B] Folder Options[/B].
[IMG]http://helpdeskgeek.com/wp-content/pictures/2008/10/toolsfolderoptions-thumb.png?d620e9[/IMG]
Click on the [B]View[/B] tab and then scroll all the way to the bottom of the list until you see the checkbox [B]Use Simple File Sharing (recommended)[/B].
[IMG]http://helpdeskgeek.com/wp-content/pictures/2008/10/disablesimplefilesharing-thumb.png?d620e9[/IMG]
[/QUOTE]
[/LEFT]
مرسی علی جان خیلی عالی بود
در مورد آنتی ویروس که گفتی تقریبا همه آنتی ویروسها با یه ذره بالا پایین مثل همند
شما اگر میخواید اورجینال بخری پیشنهاد من
بیت دیفندر
کاسپر
نود 32 ورژن 6
یه چیزی بگم منو دعوا نمی کننین ؟
اینایی رو که علی گفته و کاوه گفته رو چک کردم و لی بازم همونه :blush:
[QUOTE=omidan321;403942]
اینایی رو که علی گفته و کاوه گفته رو چک کردم و لی بازم همونه :blush:[/QUOTE]
دیگه فقط میتونم بهتون بگم ویندوز رو عوض کنید !
ببینید همه چی خوب بود یهو اینطوری شد
یه ویروس افتاد بعش همه چی خراب شد
[QUOTE=omidan321;403988]ببینید همه چی خوب بود یهو اینطوری شد
یه ویروس افتاد بعش همه چی خراب شد[/QUOTE]
اگر مطمئن هستید از ویروس هست یه [B]rescue disk[/B] تهیه کنید ( مثلا برای [B]ESET Smart Security[/B] ) سپس از بوت اجراش کنید ببینید مشکل رفع میشه ؟
[COLOR="silver"][SIZE=1]- - - ادامه - - -[/SIZE][/COLOR]
ولی در کل اگر ویندوز رو عوض کنید خیلی بهتر هست !