hub
A common connection point for devices in a network. Hubs are commonly used to connect segments of a LAN. A hub contains multiple ports. When a packet arrives at one port, it is copied to the other ports so that all segments of the LAN can see all packets.
A passive hub serves simply as a conduit for the data, enabling it to go from one device (or segment) to another. So-called intelligent hubs include additional features that enables an administrator to monitor the traffic passing through the hub and to configure each port in the hub. Intelligent hubs are also called manageable hubs.
A third type of hub, called a switching hub, actually reads the destination address of each packet and then forwards the packet to the correct port.
switching hub
Short for port-switching hub, a special type of hub that forwards packets to the appropriate port based on the packet's address. Conventional hubs simply rebroadcast every packet to every port. Since switching hubs forward each packet only to the required port, they provide much better performance. Most switching hubs also support load balancing, so that ports are dynamically reassigned to different LAN segments based on traffic patterns.
Some newer switching hubs support both traditional Ethernet (10 Mbps) and Fast Ethernet (100 Mbps) ports. This enables the administrator to establish a dedicated, Fast Ethernet channel for high-traffic devices such as servers.
اينها تعاريفي از هاب و سوئيچ هستند. بخون ببين كدومش بيشتر به كارت مي ياد. (ولي خودمونيمها يه انتخاب كه اينهمه دنگ و فنگ نداره)