نوشته اصلی توسط
yeganeh_p
- NetBIOS over TCP/IP is not turned on (enabled) on one or more computers in the workgroup.
- The Computer Browser service is not started or is turned off on one or more computers in the workgroup.
اولین آیتمو که تست زدی دومین آیتمم enable کن Step 2: Start the Computer Browser service
- Click Start, right-click My Computer, and then click Manage.
- Double-click Services and Applications.
- Double-click Services.
- On the right side, right-click Computer Browser, and then click Start.
- Close the Computer Management window.
اینجا هم یه نیگاه بنداز
ممنون دوست عزیز
Computer Browser تو برخی از نسخه های ویندوز کاستومایز شده مشکل داره
عدم فعال بودن Computer Browser باعث میشه کلاینت ها در شبکه دیده بشن ولی نشه وارد shre folder شد.
این مسئله رو قبلا چک کردم ولی فایده ای نداشت.NetBIOS over TCP/IP هم چک شد نتیجه نگرفتم....
اما وقتی event کلاینت هایی که مشکل دارنو رو چک میکنم
به event ID: 1054 و event id:15 بر می خورم
----
Details
Product: Windows Operating System
ID: 1054
Source: Userenv
Version: 5.2
Symbolic Name: EVENT_FAILED_DSNAME
Message: Windows cannot obtain the domain controller name for your computer network. (%1). Group Policy processing aborted.
Explanation
A network connectivity or configuration problem exists. Group Policy settings cannot be applied until the problem is fixed.
User Action
To troubleshoot the network connectivity or configuration problem, try one or all of the following:
In Event Viewer, click System, and check for any networking-related messages, such as Netlogon messages, that indicate a network connectivity issue.
At the command prompt, type netdiag, and note any errors. Those errors usually have to be resolved before Group Policy processing can continue.
At the command prompt, type gpupdate, and then check Event Viewer to see if the Userenv 1054 event is logged again.
To verify that the domain controller can be contacted through Domain Name System (DNS), try to access \\mydomain.com\sysvol\mydomain.com, where mydomain.com is the fully qualified DNS name of your domain.
Verify that you can access the domain controller by using tools such as the Active Directory Users and Computers snap-in.
Check to see whether other computers on your network are having the same problem.
If this computer is a part of a cross-forest domain, verify that the forest for the user account is currently available and can be contacted by the computer on which the Group Policy processing failed.
If none of the above actions identified the problem, see the 'Troubleshooting Group Policy in Windows Server 2003' white paper at the Microsoft Web site.
------
Details
Product: Windows Operating System
ID: 15
Source: AutoEnrollment
Version: 5.2
Symbolic Name: EVENT_FAIL_BIND_TO_DS
Message: Automatic certificate enrollment for %1 failed to contact the active directory (%2). %3 Enrollment will not be performed.
Explanation
Autoenrollment starts every time Group Policy is updated or when a user logs on to Windows. Each time autoenrollment starts, it tries to contact the Active Directory directory service. This event, Autoenrollment 15, is logged when autoenrollment fails to contact Active Directory. If the computer cannot contact Active Directory, for example when a laptop computer is not connected to the corporate network, this event appears in the Event Viewer. This is expected and normal.
User Action
If the computer does not currently have connectivity to Active Directory, then no user action is required. If the event is repeatedly generated after the computer has established a connection to Active Directory, verify that the computer can receive Group Policy updates by using the Gpupdate.exe command-line utility. For more information about the Gpupdate.exe command-line utility, see Help and Support.
به نظر شما از گروپ پالسیه؟؟؟ من سرویس WSUS رو فعال کردم ممکنه برای پالسی اون باشه؟؟؟؟