1. Go to iManager - Border Manager - Access Rules - Select Server - Click OK - New - Generic TCP
Name: BlockIPs
Under Condition Group Click New
Select Destination: Host IP Addresses
Comparison: IP:Equals
To the Value add the following ips: 65.49.2.221, 63.210.29.10, 216.92.231.150, 219.85.33.55, 220.140.112.39, 125.224.214.37, 125.230.14.170, 122.122.217.203, 125.224.119.3, 122.124.103.168, 219.85.6.165, 122.125.200.154, 118.161.199.156, 122.123.3.155, 125.230.10.156, 218.163.4.182, 66.203.2.74, 61.223.243.171, 61.62.189.41, 122.125.198.55, 65.49.2.96, 122.124.68.9, 65.49.2.91, 65.108.179.118, 220.137.26.76, 218.174.3.199, 218.168.61.198
Click New again
Select Origin Server Port
Value: 443
Action: Deny Access
Click OK.
2. Go to iManager - Border Manager - Access Rules - Select Server - Click OK - New - HTTP
Name: BlockURLs
Under Condition Group Click New
Select URL
Type: Configured
Comparison: URL:Starts with
To the Value add the following urls:
http://219.85.6.165/*,
http://118.160.42.82/*,
http://61.224.2.105/*,
http://59.117.176.14/*,
http://122.125.198.55/*,
http://218.163.4.182/*,
http://122.123.100.210/*,
http://61.223.243.171/*,
http://122.120.65.62/*,
http://65.49.2.221/*,
http://122.124.103.168/*,
http://61.62.189.41/*,
http://122.127.97.197/*,
http://220.136.222.117/*,
http://125.225.42.118/*,
http://61.64.149.118/*,
http://125.224.141.12/*,
http://65.49.2.96/*,
http://65.49.2.91/*,
http://122.121.223.121/*,
http://125.225.43.123/*,
http://61.229.108.97/*,
http://125.229.4.122/*,
http://61.64.206.121/*
Action: Deny Access
Click OK.
3. Go to iManager - Border Manager - Access Rules - Select Server - Click OK - New - HTTP
Name: BlockVideoURLs
Under Condition Group Click New
Select URL
Type: Configured
Comaprison: URL:Ends with
To the Value add the following urls:
http://*s=4897456,
http://*s=4861896,
http://*s=4897495
Action: Deny Access
Click OK.
In this step you will see that the URLs you added will have an ending /.
To remove that, you have to click Apply Changes, than click Backup, it will save you the config.xml file containing all the configured rules.
Open the saved file find the listed urls like:
http://*s=4897456/ and remove the / from the end of them.
Save the file.
Go to iManager - Border Manager - Access Rules.
Select the server.
Click Restore link.
Browse the just saved file.
Click Restore button.
As a final step, go to iManager - Border Manager - Access Rules
Select the server.
Click OK.
Click Apply Changes.
After you added the above rules, go back to iManager - Border Manager - Access Rules
Select the server.
Click OK.
And move the above 3 rules to the beginning of the list.
Click Apply Changes button.